UV glue, also known as shadowless glue, is a type of adhesive that is cured by specific wavelengths of light. UV glue triggers monomer polymerization and cross-linking chemical reactions under the action of photoinitiators, causing the adhesive to transform from liquid to solid within seconds. This curing process is not only fast, but also has high transparency and can be made into different refractive indices. UV glue is widely used in optical lenses, plastic film materials, electronics, medical, optical instruments, optical communication industries, etc. due to its high efficiency and environmental friendliness.
Product Description
JM 5339 is one component epoxy for the application of fiber optics and electronic devices. This resin is easy to operate and exhibits perfect bonding for different substrates. For its performance and reliability, this product is used widely in various areas and especially for optical fiber bonding.
Features
1. This resin is easy to use without mixing, reducing the working time and increasing efficiency simultaneously.
2. This product is easy to operate, excellent fluidity , and good surface gloss.
3. This product will not release by-products and exhibit low volume shrinkage during curing.
4. This resin offers excellent chemical resistance and solvent resistance.
5. This product complies with the RoHS regulations.
Typical Uncured Properties
Appearance
Color
Viscosity 25ºC, S21 50 rpm, cps |
JM 5339
Liquid
Colorless 200~550 |
Typical Curing Properties
| Pot Life, 25ºC, days |
3 |
| Recommended Wavelength, nm |
310~365 |
| Minimum Light Intensity, mW/cm2 |
> 50 |
| Minimum Light Energy, mJ/cm2 |
3,000~6,000 |
| Post Cure Time,120 ºC , min |
30 |
This product can cure by heat. The curing condition is as below.
Through Cure Time, 130ºC , min 60
*Avoid the resin exposure to light and heat.
| Glass Transition Temp. ,(MDSC), ºC |
>120 |
| Specific Heat 0ºC, J/gºC |
1.032 |
| Specific Heat 25ºC, J/gºC |
1.092 |
| Specific Heat 50ºC, J/gºC |
1.256 |
| Specific Heat 75ºC, J/gºC |
1.361 |
| Specific Heat 100ºC, J/gºC |
1.525 |
| Durometer Hardness , Shore D |
86 |
| Water Absorption Ratio (25ºC /24hr) , % |
1.21 |
| Water Absorption Ratio (80ºC /24hr) , % |
3.19 |
| Water Absorption Ratio (100ºC /1.5hr), % |
2.91 |
| Degradation Temp. (TGA 10 ºC /min), ºC |
333 |
| Weight Loss Ratio@100ºC , % |
0 |
| Weight Loss Ratio@150ºC , % |
0.52 |
| Weight Loss Ratio@200ºC , % |
1.00 |
| Weight Loss Ratio@250 ºC , % |
1.86 |
| Weight Loss Ratio@300ºC , % |
3.01 |
| Weight Loss Ratio@350ºC , % |
7.00 |
* 1 Specimen Cure Condition: 6,000mJ/cm2 + 120 ºC/ 30min
| Model |
Color |
Viscosity |
UV energy |
heating temperature |
Tg point |
Ti (thixotropic index) |
hardness (Shore) |
| JM6133 |
black |
65000 |
6000mj |
80ºC,60min |
78 |
2.2 |
87 |
| JM6134 |
black |
80000 |
6000mj |
80ºC,60min |
106 |
2.2 |
90 |
| JM6139 |
black |
2000-5000 |
6000mj |
80ºC,60min |
|
|
60 |
| JM6130 |
black |
8000-12000 |
6000mj |
80ºC,60min |
|
1.5 |
50 |
| JM4375 |
black |
9000 |
6000mj |
80ºC,60min |
77 |
1.5 |
80 |
| JM533 |
"Transparent" |
400-700 |
6000mj |
80ºC,60min |
116 |
|
86 |
| JM5332 |
Milky white |
550 |
|
80ºC,60min |
153 |
|
86 |
| JM5333 |
"Transparent" |
30000-50000 |
6000mj |
100ºC,40min |
132 |
3.2 |
80 |
| JM5335 |
"Transparent" |
1000-2000 |
6000mj |
100ºC,40min |
132 |
2.2 |
80 |
| JM5336 |
"Transparent" |
2000-3000 |
6000mj |
100ºC,40min |
132 |
2.2 |
80 |
| JM5330 |
Slightly yellow |
1500 |
3000mj |
110ºC,20min |
112 |
|
82 |
| JM5336 |
Slightly yellow |
2800 |
3000-6000mj |
110ºC,10min |
140 |
|
87 |
| JM4372 |
Slightly yellow |
4000 |
6000mj |
80ºC,60min |
45 |
|
82 |
| JM470 |
Milky white |
|
|
80ºC,60min |
|
|
83 |
| JM562 |
Slightly yellow |
200,000 |
6000mj |
110ºC,10min |
138 |
1.5 |
94 |
| JM5622 |
Milky white |
200,000 |
6000mj |
110ºC,10min |
138 |
1.5 |
94 |
| JM566 |
Semi-transparent |
53500 |
6000mj |
110ºC,10min |
113 |
3 |
85 |
| JM5662 |
Semi-transparent |
23500 |
6000mj |
110ºC,10min |
172 |
2.2 |
90 |
| JM5664 |
Slightly yellow |
23500 |
6000mj |
110ºC,10min |
172 |
2.2 |
90 |
| JM5666 |
Semi-transparent |
24000 |
6000mj |
110ºC,10min |
170 |
2.1 |
90 |
| JB7594 |
Slightly yellow |
12000 |
6000mj |
80ºC,60min |
38 |
|
84 |
| JM585 |
Milky white |
35500 |
3000mj |
100ºC,30min |
158 |
3 |
80 |
| JM5852 |
Milky white |
27000 |
3000mj |
100ºC,30min |
160 |
1.5 |
79 |
| JM668 |
"Transparent" |
6200 |
3000mj |
80ºC,60min |
55 |
4.5 |
89 |
| JM679 |
Milky white |
7900-12000 |
6000mj |
80ºC,60min |
60 |
1.95 |
78 |
| JM732 |
"Transparent" |
3300 |
6000mj |
80ºC,60min |
49 |
|
79 |
| JM4672 |
Slightly yellow |
8000 |
6000mj |
80ºC,60min |
108 |
2 |
83 |
1. Are you a factory or trading company?
Yes. We are factory focus on the development and application of polymer materials and high-end electronic adhesives.
2.Any OEM/ODM service ?
JOME can offer the customer OEM label service,and will give the protection of the your right in your market.
3.How to be JOME's distributor ?
As the growing of JOME's global business,we need to find more and more distributors and agents worldwide. JOME will provide the best solution and service for our partners. For more information, pls contact with us directly
4.How to get samples ?
Contact with us to get samples
5.Delivery time ?
Normally, delivery time of sample order is 3 to 7 days, standard order is 7-20 days.
6. How to proceed an order?
Firstly let us know your requirements. Secondly we quote according to your requirements or our
suggestions. Thirdly customer confirmed the details and pay deposit for order. Fourthly we arrange
the production then you pay balance to us before shipment.
7. Shipment:
By Express: DHL, UPS, Fedex, TNT, EMS, Ect.
If your order is big, we'll advise you to use Air or Sea shipping through your nominated forwarder
agent.Our long-term cooperated agent is also available.
Audited Supplier 
){kind=link}