Advanced Single-Component Thermal Conductive Epoxy for CPU Attachment and Efficient Heat Dissipation

Product Description

The main components of single component epoxy adhesive include epoxy resin base material, curing agent, diluent, accelerator, etc. It can be used directly without mixing with other components. This adhesive has the advantages of convenience and ease of use, excellent performance, fast curing speed, and wide adhesion. It has the advantages of high adhesion strength, simple process, small curing shrinkage, good fatigue resistance, no volatile solvents, and low harm to the environment and human body.

Product description
JOME 3621 is a grey, solvent-free, one-component epoxy structural adhesive, This product has good toughness and impact strength, When it is fully cured by heat, it provides excellent bonding properties, electrical properties, moisture resistance and mechanical properties. It has high bonding strength to most substrates including glass, metal, ceramics, etc. At the same time, it can meet the bonding and mechanical performance requirements under high temperature, and is widely used in automotive electronics, pressure sensors, connecting wire harnesses, and motor magnetic sheet bonding.
 
Technical parameters
 

ITEM		Test method or condition	Test results
			3621
Before curing	Appearance	Visual	Black
	Viscosity	Thixotropic paste
	Viscosity	Thixotropic paste
	Thixotropic index	-	2.5
	Density	g/cm3 , 25ºC	1.25-1.35
After curing	Hardness	Shore-D, 25ºC	85
	Glass transition temperature Tg	DSC, ºC	145
	Long-term temperature resistance range	ºC	-50-180
	Shear strength, steel-steel	MPa, 25ºC	27
		MPa, 120ºC	24
		MPa, 150ºC	19
	Shear strength, galvanized sheet	MPa, 25ºC	18
		MPa, 120ºC	17
		MPa, 150ºC	13
	Impact strength	KJ/m2,25ºC	>6
	Linear expansion coefficient	ppm	45 ,<Tg 100,   >Tg
	Volume resistivity	Ω · cm, DC500V	1.0×1015

Note: 1. The data in the table are the measured data under a specific condition and are only for reference, which does not guarantee that the data obtained by the customer in the actual use can be completely consistent with it.
 

type	model number	Product Description	Color	Viscosity	Complete curing time	Hardness	Thermal conductivity	Usage temperature
Single component epoxy	JOME 3621	High thixotropy, non brushed, high-strength type	grey	Thixotropic paste	120ºC 1h	85D	0.2W	-50~200ºC
	JOME 3618	Low viscosity, low-temperature curing	Matte black	15000cps	75ºC 30min	78D	0.3w	-50~120ºC
	JOME 491	High temperature resistance, high strength	cream-like color	200000cps	120ºC 1h	83D	-	-50~350ºC
	JOME 4910	High temperature resistance, high strength	black	6600cps	120ºC 1h	88D	-	-50~300ºC
	JOME 9468	High transparency	colourless	550-650cps	80ºC 30min	38D	-	-45~150ºC
	JOME 7997	3.0W high thermal conductivity structural adhesive	grey	380,000-580,000cps	150ºC 60min	85D	3.0W	-45~150ºC

 
1. Are you a factory or trading company?
Yes. We are factory focus on the development and application of polymer materials and high-end electronic adhesives.

2.Any OEM/ODM service ?

JOME can offer the customer OEM label service,and will give the protection of the your right in your market.

3.How to be JOME's distributor ?

As the growing of JOME's global business,we need to find more and more distributors and agents worldwide. JOME will provide the best solution and service for our partners. For more information, pls contact with us directly

 

4.How to get  samples ?

Contact with us to get  samples

 

5.Delivery time ?

Normally, delivery time of sample order is 3 to 7 days, standard order is 7-20 days.

 

6. How to proceed an order?
Firstly let us know your requirements. Secondly we quote according to your requirements or our
suggestions. Thirdly customer confirmed the details and pay deposit for order. Fourthly we arrange
the production then you pay balance to us before shipment.

7. Shipment:
By Express: DHL, UPS, Fedex, TNT, EMS, Ect.
If your order is big, we'll advise you to use Air or Sea shipping through your nominated forwarder
agent.Our long-term cooperated agent is also available.